![]() ![]() ![]() The result "zero" of logical AND between Home IP address and Subnet mask is allowed.There is a case that the missing character is occurred in combo box which shows the PB name such as device registration dialog.There is a case that ANS or ORS circuit which has local device cannot be converted.The control point is changed from "0 - 32767" to "1 - 32768" in Cam point method of FP-XH M8N30T.Supports the PRINT instruction in FP0H (from V1.7).Windows XP and Windows Vista is not supported from this version.Version-Up Information (Ver.2.31.0 to Ver. (TCP ULP timeout value is worked based on TCP resend timer value) ![]() In the Built-in ET-LAN of FP7, the TCP-ULP timeout value can be defined but this value did not work in FP7.There is a possibility that the GR7 is stopped when the ladder is printed without any comment.The EDS file which has minus ENUM value cannot be registered.There is a force quit possibility when the several GR7 is started, and project is downloaded.When the CSTP, NSTP and NSTL instructions which have branch are converted, the error is occurred.When the integer device is replaced, the symbol such as "#" or "%" is disappeared.Add the detail information to the error message which is displayed when the error is occurred during EDS file registration.Add the string data type with header in logging trace setting of FP7.Add the new product of FP7 in Select PLC Type dialog.Version-Up Information (Ver.2.32.1 to Ver. (The minimum button is deleted in this version) The minimum button does not work in guidance bar in PM7 and PMX.When the index register is trying to input by function bar on the empty area which right side is vertical line, the GR7 is stopped in force.There is a case that the "verify" detects discrepancy even though the same configuration data in FP7 W-Link unit.In SET/RST/ALT instruction, index register can be used for E device but FP7 does not support it.The number of data register (DT) which cannot be used as a start number of hold area can be set in memory configuration setting dialog of FP7.Slider cannot be operated by keyboard in memory configuration setting dialog of FP7.After registering the device on Force I/O dialog, change the mode from forced to normal and open the Force I/O dialog again and if Ctrl + number key is pressed, GR7 is stopped in force. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |